Feeds Archives
View MORE Selected Feeds:
A Survey
I was playing around with my web hosting account and found that my hosting package allows me to create online surveys. I decided toOriginally posted by Deelip Menezes from Deelip Menezes ReBlogged here on 27 Jan 2007
One More Thing You Didn't Know About Me
As a follow up to my 5 Things You Don't Know About Me posting, other bloggers have been able to make nice caricatures ofOriginally posted by ScottBlogs from Beyond the Paper ReBlogged here on 27 Jan 2007
TIPS: AutoCAD Keyboard Modifiers
Even as Autodesk works to make AutoCAD more interactive, the company is also adding more keyboard modifiers. Trolling the Web, I came across twoOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 26 Jan 2007
Import/Export/Open/Save Options in Map3D 2006
Sometimes, you just need to know your options... what you can open, what you can save to. In Map3D 2006, there are a fewOriginally posted by Melanie (Stone) Perry from Mistress of the Dorkness ReBlogged here on 26 Jan 2007
An easy way to draw a 3d roof in AutoCAD 2006
An easy and praticalway to draw a 3d roof in AutoCAD 2006. [[ This is a content summary only. Visit MyWebsite.com for full links,Originally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira ReBlogged here on 26 Jan 2007
American Machinist: Need to Share CAD Files? DWF IT
Senior Public Relations Manager, Marie Domingo, reports that DWF was prominently featured in a recent American Machinist article:Need To Share CAD Files? DWF ITOriginally posted by ScottBlogs from Beyond the Paper ReBlogged here on 26 Jan 2007
One for the bit-twiddlers
In the last post we looked at some of the potential uses for the Reflector application. I didn't end up elaborating on the thirdOriginally posted by Kean Walmsley from Through the Interface ReBlogged here on 26 Jan 2007
Future Phases
Revit has four states relative to phases, New, Existing, Temporary and Demolished. There is no future state. What can you do if you wantOriginally posted by Steve from Revit OpEd ReBlogged here on 26 Jan 2007
The System Variable Editor
Systems variables, they can really mess thing up, and they can really give you a lot of power. Thing is, it's difficult to seekOriginally posted by Todd from The Lazy Drafter ReBlogged here on 26 Jan 2007
DWG TrueConnect - AutoCAD ao Inventor
Vale a pena ver a forma como o AutoCAD se integra com o Inventor e como é possível beneficiar dos dois.... [[ This isOriginally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira ReBlogged here on 26 Jan 2007
Microsoft OneNote
This is a post about a little known application that has saved me more than once. It’s called OneNote. And the 2007 version isOriginally posted by Kevin from Land Development Engineering ReBlogged here on 26 Jan 2007
AutoHotkey to the rescue
As described in the post RSS Feeds in Outlook 2007 I ended up with hundreds of feeds in both Outlook, IE7 and Windows LiveOriginally posted by JTB World from JTB World Blog ReBlogged here on 26 Jan 2007
ADT Window Style Type in a PSD
I noticed a question on the Architectural Desktop discussion group and wanted to share the solution here. The Window Type for a windows style isOriginally posted by JTB World from JTB World Blog ReBlogged here on 26 Jan 2007
IBM-DS Relationship Continues to Change
Dassault Systemes announces that IBM and Dassault Systemes Expand Strategic Partnership: IBM to Sell Additional DS Solutions, but closer reading of the press releaseOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 25 Jan 2007
Google Promotes 3D CAD at Universities
The Official Google Blog today announces the its Show us your university campus in 3D contest. The contest is what you might expect: 1.Originally posted by ralph grabowski from WorldCAD Access ReBlogged here on 25 Jan 2007
MEPFP Drafter needed in St. Louis
I was asked by colleague to spread the word that his firm is looking for a drafter post-haste, following is a brief job description:ImmediateOriginally posted by Melanie (Stone) Perry from Mistress of the Dorkness ReBlogged here on 25 Jan 2007
New Autodesk Blog Added: Connected
Connected - a blog about design and building project collaboration A warm digital welcome to Mike Gemmell, Jason Pratt, and Alex Willingham toOriginally posted by CADman from Between the Lines ReBlogged here on 25 Jan 2007
Dritte Teil: Fix Those Press Releases!
Brian Solis's entire point in writing Enough Already: Getting the Social Media Release All Wrong is to dicuss social marketing. As best as IOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 25 Jan 2007
DWF in Buzzsaw
Buzzsaw is one of the products Autodesk offers in the area of Collaborative Project Management. In past blog postings, I have often included informationOriginally posted by ScottBlogs from Beyond the Paper ReBlogged here on 25 Jan 2007
A Day of Training for Me!
Last night, as mentioned yesterday, I was fortunate to have the wonderful Heidi Hewett and Matt Murphy over for a nice dinner. I believeOriginally posted by Lynn Allen from Lynn Allen's Blog ReBlogged here on 25 Jan 2007
Autodesk's Official Statement on DWG and ODA
I recently asked Autodesk bashers an open question. Not happy with the replies I decided it was time to get it straight from theOriginally posted by Deelip Menezes from Deelip Menezes ReBlogged here on 25 Jan 2007
Update: Autodesk employee's blogs, 28 and counting...
Having just read the following blog posts "New Autodesk Blog: Connected" by Scott Sheppard, I have taken the time to update the original BLAUGIOriginally posted by MikePerry from BLAUGI ReBlogged here on 25 Jan 2007
Sold!!! UGS Goes to Germany's Siemens
Siemens AG of Germany agrees to buy UGS Corp. for US$3.5 billion. To afford the purchase, Siemens is selling shares in VDO, a automotiveOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 25 Jan 2007
Change at the Top - Sara Ferris, Cadalyst Magazine
Questex Media, publishers of Cadalyst, surprised CAD insiders by announcing that long time veteran Sara Ferris was being replaced as editor-in-chief. In her placeOriginally posted by rtara from CAD Insider ReBlogged here on 25 Jan 2007
New Autodesk Blog: Connected
Three heads are better than one. Solutions Engineers Alex Willingham, Mike Gemmell, and jason Pratt have a blog related to Collaborative Project Management:Connected -Originally posted by ScottBlogs from Beyond the Paper ReBlogged here on 25 Jan 2007
Siemens buying UGS?
I just got an IM from Brad Holtz, the president of Cyon Research, with the heads-up that Siemens appears to be close to buyingOriginally posted by Evan Yares from The CAD Industry ReBlogged here on 25 Jan 2007
Kyle B. is taking over Revit Systems
If you follow the Revit Systems discussion group at all, you know Kyle B. has always been there with an insightful answer or anOriginally posted by Todd from CAD Shack ReBlogged here on 25 Jan 2007
More Translators for Acrobat 3D -- Free!
Adobe quietly announced more CAD translators for free. Acrobat 3D now imports these heavy-duty 3D formats: * Dassault Systemes CATIA * PTC Pro/ENGINEER *Originally posted by ralph grabowski from WorldCAD Access ReBlogged here on 24 Jan 2007
TIP: AutoCAD Dynamic Viewing
I had read that AutoCAD 2007 has real-time 3D view movement, but I could never get it to work using this procedure: 1. HoldOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 24 Jan 2007
Wired News: Military Builds Robotic Insects
Military Builds Robotic InsectsBy David Hambling02:00 AM Jan, 23, 2007If you feel something crawling on your neck, it might be a wasp or aOriginally posted by Joel from Orr's Observations ReBlogged here on 24 Jan 2007
PMTC: Up 15%
Parametric Technology this morning reports its Q1 revenues are up 15% from a year ago: US$221.7 million. For Q2, PTC expects revenues to beOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 24 Jan 2007
Par Deux: Fix Those Press Releases!
In a follow-up article Enough Already: Getting the Social Media Release All Wrong, Brian Solis of FutureWorks PR describes reader reactions. Some ask, whyOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 24 Jan 2007
Construction Executive 2006 Hot Products
Senior Public Relations Manager, Marie Domingo, reports that in December 2006, Autodesk’s Collaborative Project Management (CPM) solution was featured in the Construction Executive 2006Originally posted by ScottBlogs from Beyond the Paper ReBlogged here on 24 Jan 2007
The Red Asterix
Yesterday I posted a scandalous looking article titled "Is Autodesk Promoting IntelliCAD?". Of course, I do not think they are, but the little devilOriginally posted by Deelip Menezes from Deelip Menezes ReBlogged here on 24 Jan 2007
Knowing What You Don't Know About CAD
I found a great Blog today that I Love. Yes, it's love, but don't worry Mike Massey has plenty of love to go around.Originally posted by Todd from CAD Shack ReBlogged here on 24 Jan 2007
Dynamic Blocks inside of ABS - Visibility Solution
For all the awesome tools inside of ABS and ADT one of my favorite tools comes from AutoCAD. The Dynamic block just happens toOriginally posted by Todd from CAD Shack ReBlogged here on 24 Jan 2007
Marking up a Model
Although the title of this posting conjurs up images of doodling on Heidi Klum or Fabio with a Flair pen, that's not it. :-)Originally posted by ScottBlogs from Beyond the Paper ReBlogged here on 24 Jan 2007
Some Quickie Attribute Tips
A million thanks for ALL those emails about the Colts! You are all much too kind. I'm sure you international folks are shaking yourOriginally posted by Lynn Allen from Lynn Allen's Blog ReBlogged here on 24 Jan 2007
ASP.NET AJAX 1.0 Released
Having started to develop a little with ASP.NET using SOAP etc. I think it's time to look more at AJAX. Link to ScottGu's Blog :Originally posted by JTB World from JTB World Blog ReBlogged here on 24 Jan 2007
Reflecting on AutoCAD .NET
Reflection Now we’re finally going to spend some time looking at Reflection. As mentioned in a previous post, .NET assemblies include intermediate language instructionsOriginally posted by Kean Walmsley from Through the Interface ReBlogged here on 23 Jan 2007
Autodesk and ODA, partners?
Originally posted by R.K. McSwain from CAD Panacea ReBlogged here on 23 Jan 2007
Is Autodesk Promoting IntelliCAD?
I was dumbfounded to see the following statement at an Autodesk blog."IntelliCAD is a low cost Computer Aided Design alternative that provides DWG fileOriginally posted by Deelip Menezes from Deelip Menezes ReBlogged here on 23 Jan 2007
Old Lessons Still Apply
I just finished reading Dreaming in Code, a book which chronicles the first years of Chandler, a major software development project that could haveOriginally posted by Evan Yares from The CAD Industry ReBlogged here on 23 Jan 2007
Fix Those Press Releases!
From time to time, I complain about how badly some press releases are written. It's part of my job to read them, some tenOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 23 Jan 2007
Autodsys Releases Autodsys IntelliCAD 6.2
IntelliCAD is a low cost Computer Aided Design alternative that provides DWG file support as well as support for industry standard commands, menu files,Originally posted by ScottBlogs from Beyond the Paper ReBlogged here on 23 Jan 2007
ConnectPress Loses Talent
Connectpress, vendors of the wide-ranging CAD communities that include Pro/E Community, UGS Community, Inventor Connections and more, said goodbye to the services of publisherOriginally posted by rachael Dalton-Taggart from PR, Marketing and the Business of CAD ReBlogged here on 23 Jan 2007
Relative XREF Path fix - XRP!
CADD Manager Code Link! I have used this program forever. And it is GREAT!XRP - generate relative paths for XREFs - Xrp2004.lsp - createdOriginally posted by CADDManager from CADDManager.com Blog ReBlogged here on 23 Jan 2007
Change multiple wall orientations in Revit
In Revit Building or Revit Structure, a user can flip the wall orientation to adjust what is exterior or interior. To do this, aOriginally posted by Mike from The Mad Cadder ReBlogged here on 23 Jan 2007
Snow in Phoenix
In a sure sign of the coming of the Apocalypse, it snowed in Phoenix on Sunday. Those tiny white flecks are actually snow -Originally posted by ScottBlogs from Beyond the Paper ReBlogged here on 23 Jan 2007
Video: Small Building tutorial 15
As mentioned in the previous tutorial our greenhouse lacks diagonal bracing, so you'll learn to edit the Glass object at sub object Edge modeOriginally posted by tbdesign from Ted Boardman's Visualization Blog ReBlogged here on 23 Jan 2007
Manage your printing & plotting
Looking for a powerful way to track and manage your printing and plotting jobs on your network? We have recently added Watch Dog -Originally from Recently Added Software ReBlogged here on 22 Jan 2007
RSS Bandit 1.5.x (Jubilee) Release Candidate Installer Available
Installed and still my main feed reader. Items marked as read when viewed in the Newspaper Source: RSS Bandit 1.5.x (Jubilee) Release Candidate InstallerOriginally posted by JTB World from JTB World Blog ReBlogged here on 22 Jan 2007
View DWF's in Vista
From Microsoft - not Autodesk, Microsoft:"Microsoft has completed development and testing of Windows Vista and has released the final code to manufacturing, committing toOriginally posted by Scott from Civil 3D - Paving the Way ReBlogged here on 22 Jan 2007
DS Improves Press Release Language
I don't want to take credit, but Dassault Systemes's pr firm, Beaupre, greatly improved the language in its recent press release. Take a lookOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 22 Jan 2007
AutoCAD is different ...
Originally posted by AutoCADder from AutoCADder ReBlogged here on 22 Jan 2007
Delete all RSS Feeds folders in Outlook 2007
I made the mistake to import my OPML file into Microsoft Outlook 2007 and with several hundreds of feeds I found that there wasOriginally posted by JTB World from JTB World Blog ReBlogged here on 22 Jan 2007
Linux Compilation Remarks for gcc 4.x DWF Toolkit compilation
The DWF Toolkit is used by Autodesk developers to read and write DWF files. Other companies also use the toolkit to support DWF inOriginally posted by ScottBlogs from Beyond the Paper ReBlogged here on 22 Jan 2007
SolidWorks Does Oopsies
The DwgGateway Web site, sponsored by SolidWorks, has a couple of oopsies that need to be cleaned up: * The free download -- theOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 22 Jan 2007
Autodesk Software Recast Computervision-like by Microsoft
An article in eWeek makes Autodesk sound like a Computervision of the 1980s. That was when a CAD station cost $100,000 - $150,000 --Originally posted by ralph grabowski from WorldCAD Access ReBlogged here on 22 Jan 2007
CADD Manager Journal - January 2007
Are you a subscriber? Checking the Standard - a plan for proper reviewing A CAD Review Process CAD File Review Checklist Survey Says -Originally posted by CADDManager from CADDManager.com Blog ReBlogged here on 22 Jan 2007
The Colts are Super Bowl Bound!!!
OMG!!! I can't believe it...I have been screaming for the last half hour!!! I was afraid to post on Friday for fear I wouldOriginally posted by Lynn Allen from Lynn Allen's Blog ReBlogged here on 22 Jan 2007
RSS Feeds in Outlook 2007
Microsoft Outlook 2007 supports subscription of RSS Feeds. That is great! But is that useful? Not for me. If you only have a handfulOriginally posted by JTB World from JTB World Blog ReBlogged here on 22 Jan 2007
AutoCAD - one full floppy and growing...
Originally posted by AutoCADder from AutoCADder ReBlogged here on 22 Jan 2007
Comentando o tráfego no meu Blog
Em 3 meses o CADptbr - Falando sobre CAD, GIS e 3D em Português… registoumais de14.500 visitantes únicos (entende-se por visitante um e umOriginally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira ReBlogged here on 21 Jan 2007
Boas notícias para quem tem produtos Autodesk e PTC
Segundo um artigo saído hoje no CADwire a Autodesk e a Parametric Technology Corp chegaram a um acordo de modo a tornar possível umaOriginally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira ReBlogged here on 21 Jan 2007
PTC SMB Travelogue, Going Home
To finish off the travelogue: On the shuttle bus back to Boston's Logan airport, a young financial analyst engages me in conversation. New toOriginally posted by ralph grabowski from WorldCAD Access ReBlogged here on 21 Jan 2007
Scale-dependent Tag Tools in ADT 2006
The out-of-the-box scale-dependent room tag tools, provided in the Documentation Tool Catalog - Imperial and - Metric, use the new tag tools, just likeOriginally posted by David Koch from The Architect's Desktop ReBlogged here on 21 Jan 2007
Scale-Dependent Schedule Tags in ADT 2006 or 2007
The introduction of Schedule Tag tools and the Define Schedule Tag wizard certainly were welcome and made creating single-scale tags ever so much easier.Originally posted by David Koch from The Architect's Desktop ReBlogged here on 21 Jan 2007
ADT/ABS List Definition freeware tip
Here is a tip on practical usage of the newly released ADT/ABS List Definition freeware. Say you have a List Definition and want toOriginally posted by JTB World from JTB World Blog ReBlogged here on 21 Jan 2007
Thanks for visiting the Weekly Feeds Archives.
Click here to return to main Feeds page.