Cadopolis Weekly RSS Feeds Archive

Feeds Archives

View MORE Selected Feeds:

Final Windows Vista Release Candidate Available (RC2)

http://download.windowsvista.com/preview/rc2/en/download.htm If you want to test the final beta release "Release Candidate 2" of the next Microsoft Windows operating System Vista here is your

Originally posted by CADman from Between the Lines
ReBlogged here on 7 Oct 2006

A380: And Then There Were Three

Business Week's Carol Matlack points out that there are three incompatible CAD systems being used by Airbus: CATIA 4, CATIA 5, and PTC. Other

Originally posted by ralph grabowski from WorldCAD Access
ReBlogged here on 7 Oct 2006

Primeiros Jogos da Lusofonia - MACAU - 2006.10.07 ~ 2006.10.15

Não posso deixar de tecer um comentário pela quase nenhuma divulgação que este evento, tão importante para a Lusofonia, está a ter. É lamentável

Originally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira
ReBlogged here on 7 Oct 2006

Conversão on-line, gratuita, sem inscrição,sem instalação de "software", sem vírus e spywares

Segundo promete o site http://media-convert.com/converter/ (só experimentando…) Media-Convert funciona sem inscrição e gratuitamente. Não tem instalar nada e nenhum "software" específico é... [[ This

Originally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira
ReBlogged here on 7 Oct 2006

Autodesk University 2006 Update

I had previously mentioned that I will be teaching three classes at Autodesk University next month. Last year the one Civil 3D® class that

Originally posted by Angel Espinoza from Angel's Civil 3D Thoughts
ReBlogged here on 7 Oct 2006

New AutoCAD Blog - CAD-e-Corner

I found a great new AutoCAD Blog by Ward Romberger thanks to RSS feeds I read I read Tracy Lincoln's heads up on the new blog

Originally posted by CADman from Between the Lines
ReBlogged here on 7 Oct 2006

New Firefox 2 Release Candidate Web browser Released

The new version of the Firefox 2 web browser has just hit the web. Bear in mind this is still not the final version

Originally posted by CADman from Between the Lines
ReBlogged here on 7 Oct 2006

Still suprised after all these years

I have been fortunate enough to had the opportunity to be apart of the evolution of MotionBuilder over the past six years, and it

Originally from MotionBuilder
ReBlogged here on 7 Oct 2006

Looking for Work?

Check out the results of the CE News 2006 Best Civil Engineering Firms To Work For Contest, and kudos to Kimley-Horn and Associates, Inc.

Originally posted by Scott from Civil 3D - Paving the Way
ReBlogged here on 6 Oct 2006

SP3 Coming to a desktop near you soon!

Dave Simeone announced today (during the weekly civil 3d webcast) that there is indeed a SP3 for Civil 3D coming out in late October,

Originally posted by Kevin from Land Development Engineering
ReBlogged here on 6 Oct 2006

Blog Alert!

Ward Romberger of Oklahoma City, Oklahoma has a blog called CAD-e-Corner which is another great AutoCAD Resource http://cadecorner.blogspot.com/ Please help welcome Ward by visiting

Originally posted by Tracy Lincoln from TLConsulting
ReBlogged here on 6 Oct 2006

Sugestões para divulgarem vossos trabalhos

Duas grandes dicas para quem tem sites e quer divulgar seus trabalhos…tutoriais…passo a passo… usem a imaginação: www.filmloop.com http://slideshare.net/... [[ This is a content

Originally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira
ReBlogged here on 6 Oct 2006

Using Unfold UVs on a Head

Sometimes it seems like Unfold is one of those misunderstood or under-appreciated commands in Maya. Let's take a look at one approach for setting

Originally from Mayalicious
ReBlogged here on 6 Oct 2006

Making molecular machines work: Nature Nanotechnology

Excellent presentation of the stateof the art of molecular machines in a fascinating new journal.Nature Nanotechnology 1, - pp25 - 35 (2006)doi:10.1038/nnano.2006.45Making molecular machines

Originally posted by Joel from Orr's Observations
ReBlogged here on 6 Oct 2006

Revit JobCaptain: Our Home in Revit

From the Revit JobCaptain blog:Daniel Hughes provides technical and business procedures for implementing Revit. His 27 years of hands-on project experience provides insight from

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 6 Oct 2006

AutoShred-DWF from Pinion Software

Pinion Software is an Autodesk DWF Partner. AutoShred-DWF is an application that protects your DWF files while letting you share them in the normal

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 6 Oct 2006

The Mindjet Labs have a Blog'splosion

Mindjet Labs have launched a new look website and bunch of new blogs. Mindjet have had a “Corporate Blog” for a long time but these are more personal

Originally posted by RobiNZ from RobiNZ CAD Blog
ReBlogged here on 6 Oct 2006

BLOG ALERT! (2 for 1)

Danny Counts of L.A. CAD has a blog called Digging In... which is L.A. CAD's Civil 3D resource for unique and practical application of

Originally posted by Tracy Lincoln from TLConsulting
ReBlogged here on 6 Oct 2006

Hands-on Session Still Open…

Last day this Friday to save $500 on AU.  Here are the labs that are still have space open, including a Autodesk Revit, Autodesk

Originally posted by Joseph Wurcher from Autodesk University 2006
ReBlogged here on 6 Oct 2006

Partilhar Slide Shows online ou através de email

Normalmente envia-se o ficheiro\arquivo ppt e prontos… Agora podemos partilhar as apresentações feitas no PowerPoint ou no OpenOffice online…veja por exemplo esta... [[ This

Originally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira
ReBlogged here on 6 Oct 2006

(Code Search)

I tried the new Google Code Search and it looks promising including support for regular expressions. But it seems to not find things as

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 6 Oct 2006

Updated DWF FAQ 6.08

I updated the blog-based DWF Frequently Asked Questions (FAQ) document. I included answers to some recent questions. Some of the new questions include: What

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 5 Oct 2006

Change a Revit Mass Name

Here's how to change the name of a Revit mass object. 1. Go to the Families listing in the Project Browser2. Find Mass3. Find

Originally posted by Jay Polding from revit in plain english
ReBlogged here on 5 Oct 2006

Detailing in Revit

Many people who haven't used Revit claim that it doesn't do detailing well. They are wrong in two areas: 1. Revit doesn't 'do' details,

Originally posted by Jay Polding from revit in plain english
ReBlogged here on 5 Oct 2006

Taking Note of Autodesk University - Mind Maps to the rescue?

In this conversation about Autodesk University 2006 from the Autodesk Discussion Group Melanie points out that to get the most out of AU you need to: “TAKE DETAILED

Originally posted by RobiNZ from RobiNZ CAD Blog
ReBlogged here on 5 Oct 2006

Command/variable twins

Originally posted by AutoCADder from AutoCADder
ReBlogged here on 5 Oct 2006

The Millau Viaduct

Here’s another amazing example of civil engineering. Supported by seven piers and over 1.5 miles long, the Millau Viaduct is the highest bridge in

Originally posted by Pete Kelsey from The Dirt
ReBlogged here on 5 Oct 2006

Os Trabalhos dum Amigo

Uma nova forma de comunicar com fotos na WEB usando o FilmLoop. Para ver melhor visite esta URL Imagens de Trabalhos realizados por Luís

Originally posted by João Brogueira from CAD ptbr - Falando sobre CAD, GIS e 3D em Português...por João Brogueira
ReBlogged here on 5 Oct 2006

DWF Definition

A frequently asked question is "How does Autodesk define DWF?" DWF is an acronym for Design Web Format. DWF provides the foundation for lifecycle

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 5 Oct 2006

Use command line to launch programs

You may know that you can start certain Windows programs from the command line. These programs are in the acad.pgp file that defines aliases

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

New syllabus and test bank available for AutoCAD instructors

For the first time ever, I've completed a syllabus and test bank for AutoCAD instructors. It's posted on the Wiley Higher Education site and

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

September 2006 resource

Suppose that you would like to insert a label that displays the area of an enclosed figure. While the AREA command can show you

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Avoid drawing temporary construction lines

When you need to draw a line that doesn't start on a geometric point (endpoint, midpoint, etc.) of another object, you might draw a

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Open a drawing to a named view

When you save and close a drawing, AutoCAD remembers the last displayed view and opens it to that view. That's convenient for continuing where

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Tutorial: Create a custom simple linetype

AutoCAD comes with a number of linetypes: continuous, dashed (various lengths), dotted, dash-dot, border, center, and so on. But you can make your own.

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

My book is out!

My book is out! You can buy AutoCAD 2007 and AutoCAD LT 2007 Bible at Amazon.com today or at your bookstore. The main new

Originally posted by ellen@ellenfinkelstein from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Summer vacation!

During July and August, I won't be adding tips, or sending out newsletters. See you in September!

Originally posted by ellen@ellenfinkelstein from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

June 2006 poll

No new poll for the summer. I'll leave the May poll up. The question is, "Are you planning to switch from 2D to 3D

Originally posted by ellen@ellenfinkelstein from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

June 2006 resource

Cadopolis is a full-featured AutoCAD resource Web site. It includes information on lots of AutoCAD and AutoCAD-related software, including shareware. There's a forum. I'm

Originally posted by ellen@ellenfinkelstein from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Add commands to tool palettes from the CUI dialog box in AutoCAD 2007

As you probably know, you can add commands to a tool palette. Before AutoCAD 2007, you could only do this by choosing Tools >

Originally posted by ellen@ellenfinkelstein from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Create invisible supporting notes

Do you keep supporting notes for your AutoCAD drawings on a notepad next to your computer? Do you sometimes need to jot down tasks

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Tutorial: Create a custom command

If you find yourself using the same combination of commands and options over and over, you can easily create a custom command that executes

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

May puzzler

No puzzle this month, but a couple of alert subscribers reminded me that the answer to the last puzzle was WHOHAS, not WHOIS.

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Errata

AutoCAD 2008 and AutoCAD LT 2008 Bible: The file ab26-f.dwt for the exercise, "Creating and Configuring a Sheet Set," on p. 931 is incorrect.

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

May 2006 resource

CADdepot.com is a resource fo CAD Shareware, and lots of it. Browse through the offerings and see what you can find.

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Control the export of WMF images

"I draw diagrams in AutoCAD and export them as Windows Metafiles(WMF). After that I import them to an MS Word document. Unfortunately they are

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

Tutorial: Convert a 3D solid to a 3-view 2D drawing in model space

You may want to draw in 3D, but if you need to deliver drawings in 2D, in several views, how do you convert them?

Originally posted by ellen@ellenfinkelstein.com from AutoCAD Tips Newsletter
ReBlogged here on 5 Oct 2006

AUGI HotNews - October 2006 edition hits the stands...

AUGI's official monthly Email Newsletter "AUGI HotNews - October 2006" edition hits the stands.Some of this month's highlights...One BIG Get-TogetherTake the 2006 CAD Salary

Originally posted by MikePerry from BLAUGI
ReBlogged here on 5 Oct 2006

Scenes from Phoenix

Phoenix/Tempe was the place to be yesterday as CADsoft hosted the Phoenix CAD Camp! If you couldn't make it to Arizona, how about Florida?

Originally posted by hewetth from Heidi Hewett's Blog
ReBlogged here on 5 Oct 2006

Autodesk University 2006

Its here again, and it’s in Vegas… This year’s AU is offering a bunch of AutoCAD Mechanical classes with Jul Vie, one of my

Originally posted by Andrew de Leon from Drawing the Machine
ReBlogged here on 5 Oct 2006

Materials in Families

When building your families you might notice there are many ways to apply materials to your solids. Here are 4 ways to apply materials

Originally posted by David Duarte from Revit Beginners
ReBlogged here on 5 Oct 2006

How Much Money Do CAD People Make?

Well, well... it's that time again! The AUGI Annual Salary Survey runs through the end of October. Please, take 5 minutes of your time

Originally posted by Melanie (Stone) Perry from Mistress of the Dorkness
ReBlogged here on 5 Oct 2006

Classes we plan to record!

I posted a list of almost 200 courses we plan to capture as screen casts at this years AU.  A screencast is a recording

Originally posted by Joseph Wurcher from Autodesk University 2006
ReBlogged here on 5 Oct 2006

t-24 hours and counting

So its the day before the first city of the 3d roadshow. Tomorrow morning we start setting up our machines at the venue in

Originally from 3D Roadie
ReBlogged here on 5 Oct 2006

A.C.E.S. Landing Tomorrow

The Autodesk Civil Engineering Solutions (ACES) User Group of Southern California will be meeting tomorrow evening. Dinner, Tips, Tricks, Networking, Learning, Sharing will occur.

Originally posted by Angel Espinoza from Angel's Civil 3D Thoughts
ReBlogged here on 5 Oct 2006

Holding the Main Road Crown- An Intersection Shortcut

The fewer things I have to keep updated, the better. So when I find a shortcut that does the job, I feel the need

Originally posted by Dana Breig Probert, EIT from civil3d.com
ReBlogged here on 4 Oct 2006

Some background to AutoCAD's MDI implementation and per-document data

Thanks once again to all of you who posted your congratulations on Zephyr’s birth. I’m now getting back into the swing of things after

Originally posted by Kean Walmsley from Through the Interface
ReBlogged here on 4 Oct 2006

Just Freewheeling Along - SWEET!

Freewheel is the codename for the zero client DWF viewing from a Autodesk Labs project.  http://labs.autodesk.com http://dwfit.com Check out Scott Sheppard's post on the Freewheel

Originally posted by CADman from Between the Lines
ReBlogged here on 4 Oct 2006

Beside the Cursor...

If your interested in VBA, AutoLISP and customizing CAD read on... Since 2004 Richard Binning has been providing useful code examples plus many other

Originally from Featured Blog
ReBlogged here on 4 Oct 2006

CAD CEO Among Top 12 Paid

Jeanne Sahadi of CNN Money covers a report by The Corporate Library, which took the time to analyze the compensation of 1,400 CEOs in

Originally posted by ralph grabowski from WorldCAD Access
ReBlogged here on 4 Oct 2006

Naming Conventions or Confusions?

Ok, so there have been numerous posts on the Civil 3D Discussion Groups about the naming conventions used for the Civil product line from

Originally from Wicked Cool Stuff
ReBlogged here on 4 Oct 2006

Architectural Desktop 2007 Service Pack 1 released...

ADT 2007 SP1 was made available for some days ago and I recommend to download the readme and see if it make sense for

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Open Design Alliance supports DWG 2007

The Open Design Alliance now have DWG 2007 (file format used in AutoCAD 2007 based products) support including Trusted DWG functionality. Evan Yares will probably

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Don't use LMTOOLS to borrow Autodesk products

Borrow and return licenses from within the Autodesk product you have is the way to go. In AutoCAD it is found in the Tools

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Turbo is back

A bit nostalgic see that the Turbo development products from Borland are back. I used Turbo Pascal and later Delphi quite a lot many

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Autodesk software for free for students

Great initiative by Autodesk. One thing I wonder is what software's are available. Something in the back of my mind says that I've seen

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

How to publish selected objects to a 3D DWF file

The export to 3D DWF files have changed in AutoCAD 2007 compared to 3DDWFPUBLISH that was in AutoCAD 2006. Use File>Export or click on

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

EplotView DWF & PDF viewer Palette for AutoCAD

Check out the cool EplotView DWF & PDF viewer Palette for AutoCAD by Mark Douglas. Technorati: AutoCAD, DWF, PDF, viewer, freeware

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

AutoCAD Palette Auto-hide Speed freeware

Did you know that you can change the time it takes to show/hide or roll-up/roll-out the palette windows in AutoCAD, ADT or other verticals

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

DWGgateway supports DWG 2007

Some days ago I mentioned that Open Design Alliance supports DWG 2007. Now it seems to be used by SolidWorks an ODA member. The

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

TeamDWF has RSS feeds

I was almost sure RSS feeds would be added when I found out that Randall Newton and also Martyn Day where behind the new site TeamDWF,

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Online remote backup service

I'm trying to find an online remote backup service. I found mozy and tried it a few days and so far I'm really happy about it.

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

LSharp another Lisp alternative for .NET

LSharp is available on http://lsharp.sourceforge.net/ "L Sharp .NET is a powerful Lisp-like scripting language for .NET. It uses a Lisp dialect similar to Arc

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

FileDependancy object in AutoCAD

I will give Steve Dunn's free Code Formatter Plugin for Windows Live Writer a try here. This is really a great plugin. One problem I

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Pedit on steroids

I've updated this lisp that is useful if you want to quickly join lines, arcs and polylines into a polyline including a fuzz distance.

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Create a data link file (UDL) using code

Have you ever wondered how create a data link file (UDL) using code? Here is a sample using VB.NET: Private Sub CreateUDL() Dim sStr

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Welcome to my blog

I will cover things I hope you will find interesting like code samples, tips & trix, news and other stuff related to CAD, engineering,

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

ADT 2007 SP1 Beta

Tony Michniewicz at Autodesk confirms in the Discussion Groups "that a beta of the ADT service pack is now available, for details visit myfeedback.autodesk.com". All I

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

More about TeamDWF

A new website TeamDWF has launched according to Beyond the Paper. My first though was, where's the feeds? My second though, if Autodesk is sponsoring,

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

ObjectDCL for AutoCAD is open source

A time ago I mentioned that ObjectDCL (an interactive replacement of the DCL language for developing dialog boxes within AutoCAD using AutoLISP) was about

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

AutoCAD 2007 SP1 released

Now you have hardly no excuse to not install AutoCAD 2007. AutoCAD is now more stable than ever. Based on my experience of SP1

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

A new CADMAN+Tussilago cartoon strip

CADMAN+Tussilago home

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Tip on a bunch of free Microsoft software's you ma...

Here are some free Microsoft software's that you maybe didn't know about and that you too might like or see a need to use.

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Autodesk® Architectural Desktop Customer Council

There are several benefits to participating in the Autodesk® Customer Council. You join an exclusive group of customers who will have more communication with the

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Linus Torvald about Visual Basic and me about Sinc...

I recently learned from "Stiff asks, great programmers answer" that Peter Norvig Director of Research at Google has Lisp as one of his favorite

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Ceiling Height property in ADT 2007

I made this image a time ago and now there is a knowledge base article describing the solution if you think Ceiling Height property

Originally posted by info@jtbworld.com (JTB World) from JTB World Blog
ReBlogged here on 4 Oct 2006

Be at home in the field

Product Marketing Manager, Gabrielle Friedly, reports that customers can be at home in the field. Her story features use of DWF in the geospatial

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 4 Oct 2006

But I Didn't Do Anything?!? Yes You DID!

Every so often someone will open a project using worksharing, poke around a bit and unwittingly end up borrowing something. Typically a view, plot

Originally posted by Steve from Revit OpEd
ReBlogged here on 4 Oct 2006

Disappearing Pipes?

Have you ever had the feeling that gremlins have been in your drawings? One minute you have a pipe drawn in profile, and the

Originally posted by Dana Breig Probert, EIT from civil3d.com
ReBlogged here on 4 Oct 2006

Quick Report - Gateway AUG Meeting

We had a good meeting tonight, just under 30 attendees. Exchanged some great tips and exposed those present to some products/procedures in some projects.

Originally posted by Melanie (Stone) Perry from Mistress of the Dorkness
ReBlogged here on 4 Oct 2006

Is CAD Good or Bad?

In upFront.eZine, readers have debated whether CAD makes drawings better or worse. It's generally agreed that CAD forces new students to learn software commands

Originally posted by ralph grabowski from WorldCAD Access
ReBlogged here on 4 Oct 2006

Vault and Shortcuts Future (Interesting Read)

If you have not already read the most recent post in the blog by Dave Simeone, Civil 3D Product Manager, and Dan Philbrick, Civil

Originally posted by Angel Espinoza from Angel's Civil 3D Thoughts
ReBlogged here on 4 Oct 2006

New Service Pack Heads-Up

Anthony Governanti, Autodesk Technical Marketing Manager, recently posted a comment to this blog about holding off installing Vault 5 Service Pack 1 until a

Originally posted by Angel Espinoza from Angel's Civil 3D Thoughts
ReBlogged here on 4 Oct 2006

Revit and Dual Core

A majority of the new computers sold today are coming with Dual Core processors. What is Dual Core? Dual Core is a computer with

Originally posted by Troy Gates from Revit Coaster
ReBlogged here on 4 Oct 2006

The New AU Connect!

Learning is always listed as the number one reason for coming to AU - but peer-to-peer networking is a close second.  The AU website

Originally posted by Joseph Wurcher from Autodesk University 2006
ReBlogged here on 4 Oct 2006

Rotated UCS impacts DWF Measurement

One of our users noted that DWF files cannot be measured accurately if they were published from an AutoCAD drawing where the UCS was

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 4 Oct 2006

IntelliCAD versions

Originally posted by R.K. McSwain from CAD Panacea
ReBlogged here on 4 Oct 2006

Auto-Import Layer Key Style

Autodesk Architectural Desktop provides a way to make certain the Layer Key Style in your drawing files reflects the latest revisions without having to

Originally posted by David Koch from The Architect's Desktop
ReBlogged here on 4 Oct 2006

Transitioning from 2D to 3D AutoCAD drawings 112

In my previous posts, I updated my 2D plan to include 3D objects for the columns and beams, walls, lights and diffusers. To get

Originally posted by hewetth from Heidi Hewett's Blog
ReBlogged here on 3 Oct 2006

An Alternative?

Well, it’s finally here, and I can play with it. I’ve been anticipating this for a while, as have some of my customers. Finally,

Originally posted by Jason Hickey from civil3d.com
ReBlogged here on 3 Oct 2006

Multi-Language Electrical Component Tagging

First line English, second line Spanish (or French or ??) - not a problem. Here's a little AutoCAD Electrical utility that tries to map

Originally posted by Nate Holt from Controlling the Machine
ReBlogged here on 3 Oct 2006

Vault or Data Shortcuts

I feel so left out. I know you may have read about this, but unless I mention it too (for those who haven't heard),

Originally posted by Scott from Civil 3D - Paving the Way
ReBlogged here on 3 Oct 2006

SketchUp -> Second Life

Simple SketchUp to Second Life Exporter [eightbar.co.uk] [SketchUp's] long been discussed, in conjunction with Google Earth, as a potential virtual world, and rival to

Originally posted by ralph grabowski from WorldCAD Access
ReBlogged here on 3 Oct 2006

From My Daily Toolbox: Camtasia Studio

Many know I have used SnagIt and Camtasia from Techsmith for many years to record screen captures for documents or tutorials or to record

Originally posted by CADman from Between the Lines
ReBlogged here on 3 Oct 2006

AutoCAD 2007 Hotfix - Plotting to Raster Files Performance Improvement

ID: DL8112891 Plotting drawings to most raster file formats is slower in AutoCAD® 2007-based products when compared to previous versions of the same applications.

Originally posted by CADman from Between the Lines
ReBlogged here on 3 Oct 2006

VizDepot.com Lighthouse Rendering Contest

Thanks for the heads up Steven! Find out how you can participate in this competition, visit the website, http://www.vizdepot.com. The official rules can be

Originally posted by CADman from Between the Lines
ReBlogged here on 3 Oct 2006

DWG TrueView: Publishing DWF in black and white

A frequently asked question is "How do I publish a black and white DWF file from an AutoCAD drawing (DWG) that is in color.

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 3 Oct 2006

October 2006 Ballots for AutoCAD and Inventor Wish Lists are now open!

Thank You Mike Perry of AUGI. I almost forgot, ok so I did but I should not have. :-) Make sure to see the final

Originally posted by CADman from Between the Lines
ReBlogged here on 3 Oct 2006

Architectural Desktop 2007 Service Pack 1 released

ADT 2007 SP1 was made available for some days ago and I recommend to download the readme and see if it make sense for

Originally posted by noemail@noemail.org (JTB World) from JTB World Blog
ReBlogged here on 3 Oct 2006

Gateway AUG Meeting in St. Louis on Oct 3rd

Alright, y'all! Meeting of the Gateway AUG Tuesday night at Vatterott College in Sunset Hills. (12970 Maurer Industrial Drive St. Louis, MO 63127) We

Originally posted by Melanie (Stone) Perry from Mistress of the Dorkness
ReBlogged here on 3 Oct 2006

Do you have a LISP (routine)?

I have needed many LISP routines over the years and the most bang for the buck comes from the ones that perform little functions

Originally posted by CADDManager from CADDManager.com Blog
ReBlogged here on 3 Oct 2006

The Sandman Cometh

I'm sorry, but press releases like this one -- Headline: Dassault Systemes Announces Extended Business Process Coverage across Multiple Industries with the ENOVIA MatrixOne

Originally posted by ralph grabowski from WorldCAD Access
ReBlogged here on 3 Oct 2006

Don't hide the command line

You saw the demo, you thought it was cool, you need the real estate, so you've decided to turn off the command line. But

Originally posted by Scott from Civil 3D - Paving the Way
ReBlogged here on 3 Oct 2006

October 2006 Ballots for AutoCAD and Inventor Wish Lists are now open!

Cast your vote for features or improvements you would like to see in AutoCAD and Inventor. Make your thoughts known to Autodesk software developers

Originally posted by MikePerry from BLAUGI
ReBlogged here on 3 Oct 2006

It’s that time of year again - Nominations for AUGI BoD 2007 - 2009

Below information kindly supplied by Bill Adams ( AUGI BoD member - Secretary ). October 3rd is just the beginning... of what? A fantastic

Originally posted by MikePerry from BLAUGI
ReBlogged here on 3 Oct 2006

Daylighting My Corridor

I’ve had students ask me how to correctly tie in their contour lines when they’re creating a corridor. The main problem that they’re having

Originally posted by Jason Hickey from civil3d.com
ReBlogged here on 2 Oct 2006

Autodesk University 2006, Connect!

If you are attending Autodesk University this year in Las Vegas you should check out this years AU Connect site as well as the

Originally posted by CADman from Between the Lines
ReBlogged here on 2 Oct 2006

DWG 2007 - trusted or not

Originally posted by AutoCADder from AutoCADder
ReBlogged here on 2 Oct 2006

Architectural Desktop 2007 Service Pack 1 Now Available

Autodesk® Architectural Desktop 2007 Service Pack 1 continues Autodesk's commitment to quality for our customers by improving upon a number of features within the

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 2 Oct 2006

AutoCAD Goes Green

Product Marketing Manager, Gabrielle Friedly, reports that AutoCAD Goes Green. Her story features Michelle Kaufmann Designs (MKD):"To streamline the design process, MKD team members

Originally posted by ScottBlogs from Beyond the Paper
ReBlogged here on 2 Oct 2006

Off to the Netherlands!

Oh the neglect the blog has encountered...bad blogger!  If I quit my job I would have more time to blog...but wait...part of my job

Originally posted by Lynn Allen from Lynn Allen's Blog
ReBlogged here on 1 Oct 2006

Thanks for visiting the Weekly Feeds Archives.

Click here to return to main Feeds page.